Volume 6, Issue 5 (3-2011)
J Health Syst Res 2011, 6(5): 0-0 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Khodabakhshi A, Amin M M, Mozaffari M, Bina B. Hexavalent Chromium’s (Chromium VI) Removal from the Simulated Electroplating Industry Wastewater by Maghemite Nanoparticles. J Health Syst Res 2011; 6 (5)
URL: http://hsr.mui.ac.ir/article-1-205-en.html
URL: http://hsr.mui.ac.ir/article-1-205-en.html
1- PhD Student, Environment Research Center, Isfahan University of Medical Sciences and Assistant Professor, Department of Environmental Health Engineering, School of Health, Shahrekord University of Medical Sciences, Shahrekord, Iran
2- Associatet Professor, Environment Research Center, Isfahan University of Medical Sciences, Isfahan, Iran
3- Assistant Professor, Physic Department, Razi University, Taghbostan, Kermanshah, Iran
4- Professor, Environment Research Center, Isfahan University of Medical Sciences, Isfahan, Iran
2- Associatet Professor, Environment Research Center, Isfahan University of Medical Sciences, Isfahan, Iran
3- Assistant Professor, Physic Department, Razi University, Taghbostan, Kermanshah, Iran
4- Professor, Environment Research Center, Isfahan University of Medical Sciences, Isfahan, Iran
Abstract: (1452 Views)
Background: Removing heavy metals from industrial wastewaters by iron nanoparticles has been much noticed in the recent years. Chromium is considered as one of the emphasis environmental pollutants. There are high concentrations of chromium in the wastewater of electroplating industries. Magnetic iron nanoparticles are used to control and eliminate the heavy metals from industrial effluents through the mechanisms of adsorption, ion exchange and electro-static forces. The aim of this study was to evaluate the efficiency of magnetic nanoparticles for hexavalent chromium’s (VI) removal from the simulated electroplating wastewater and the parameters that influence its removal. Methods: The maghemite nanoparticles were prepared by sol-gel method and addition of two and trivalent iron chloride in the water environment under alkaline conditions. Then the factors influencing this process, including nano-particle concentration, initial concentration of chromium, pH, mixing rate, and retention time were studied. Findings: The findings of this study showed that in the conditions of pH 2, initial chromium concentration of 10 mg/L, synthesized magnetite nanoparticles with a dose of 1 g/ L, retention time of 5 minutes, and mixing rate of 250 rpm, about 86% of chromium (VI) is removed. In addition, characteristics of nanoparticles including, particles structure, composition, size and zeta potential was determined using analytical devices such as XRD, XRF, Zeta potential and particle seizer. Conclusion: It is concluded that magnetite nanoparticles have high performance for removal of chromium (VI) from the simulated electroplating wastewater, and removal efficiency is reversely related with pH.
Keywords: adsorption, chromium (VI), maghemite nanoparticles, simulated electroplating industry wastewater
Type of Study: Research |
Subject:
education health and promotion
Received: 2020/07/16 | Accepted: 2011/03/15 | Published: 2011/03/15
Received: 2020/07/16 | Accepted: 2011/03/15 | Published: 2011/03/15
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
