Volume 8, Issue 2 (6-2012)                   HSR 2012, 8(2): 260-266 | Back to browse issues page

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Hazrati M, Hassani A H. ارزیابی تلفیق پیش ازن زنی و فرایند انعقاد و لخته سازی با منعقد کننده پلی‌آلومینیوم کلراید و کمک منعقد کننده پلی‌الکترولیت کاتیونی در تصفیه فاضلاب بیمارستانی. HSR 2012; 8 (2) :260-266
URL: http://hsr.mui.ac.ir/article-1-385-en.html
1- MSc, Department of Enviromen Engineering, Ardabil Branch, Islamic Azad University, Ardabil , Iran
2- Associate Professor, Department of Environment Engineering, School of Environment and Energy, Science and Research Branch, Islamic Azad University of Tehran, Tehran, Iran
Abstract:   (914 Views)
Background: Hospital wastewater consists of different compositions, including medicines, disinfectants and pathogens that are excreted mainly in the absorbing wells or enter into the municipal wastewater network that leads to a contamination of water resource crisis. The purpose of this study is to evaluate pre-ozonation coagulation and flocculation process with Poly Aluminium Chloride coagulant material and cationic polyelectrolyte coagulant aid in the reduction of hospital wastewater pollution load. Methods: In this study, the laboratory system including ozone generator with a capacity of 19.8 go3/h, ozonation reactor with the volume of one liter, air diffuser and Jar-test instrument using Poly Aluminium Chloride coagulant and cationic poly electrolyte were used, and parameters of BOD5, COD, and TSS in accordance with standard methods for testing water and wastewater were investigated. Findings: Based on the results of this study, Poly Aluminium Chloride a dose of 200 mg/L with cationic poly electrolyte with a dose of 1 mg/L caused a removal efficiency of 50.0%, 81.0%, and 84.0% for COD, BOD5, and TSS respectively . Pre-ozonation with the optimal dose of 19.8 go3/h for 15 minutes increased the removal efficiency of COD, BOD5, andTSS in the process of coagulation and flocculation to 54.0%, 87.0%, and 89.0% respectively. Conclusion: The preozonation slightly increased the efficiency of the coagulation and flocculation process with Poly Aluminium Chloride coagulant material and cationic Poly electrolyte coagulant aid in removing the studied parameters and also ozonation reduced the amount of Poly Aluminium Chloride coagulants used.
Full-Text [PDF 187 kb]   (664 Downloads)    
Type of Study: Research | Subject: education health and promotion
Received: 2020/07/16 | Accepted: 2012/06/15 | Published: 2012/06/15

Add your comments about this article : Your username or Email:
CAPTCHA

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2024 CC BY-NC 4.0 | Journal of Health System Research

Designed & Developed by: Yektaweb