Volume 6, Issue 2 (3-2011)
J Health Syst Res 2011, 6(2): 0-0 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Ebrahimi A, Movahedian Attar H. Efficiency Comparison of the Microwave Oven and Conventional Electric Furnace in Volume Reduction and the Final Stabilization of Primary and Secondary Raw sludge Production in Wastewater Treatment Plant in South of Isfahan. J Health Syst Res 2011; 6 (2)
URL: http://hsr.mui.ac.ir/article-1-131-en.html
URL: http://hsr.mui.ac.ir/article-1-131-en.html
1- Assistant Professor, Environment Research Center, Isfahan University of Medical Sciences, Isfahan, Iran
2- Professor, Environment Research Center, Isfahan University of Medical Sciences, Isfahan, Iran
2- Professor, Environment Research Center, Isfahan University of Medical Sciences, Isfahan, Iran
Abstract: (1202 Views)
Background: The Biological Solids produced during wastewater treatment processes are called sludge. As sludge contains various sickening microorganisms such as pathogens, organic and inorganic substances and has adverse effects on human and environment, therefore it should be treated and processed entirely prior to disposal and then disposed in line to the environmental regulations. Thermal treatment is one of the sludge treatment methods. Among these, microwave as one of the methods, could have an important role in sludge treatment. This study investigated the Microwave application to reduce volume and the final stabilization in primary and secondary sludge produced by south Isfahan WWTP in comparison with conventional laboratory electrical furnace. Methods: A batch system was set up to compare the microwave oven and electrical furnace in converting the primary and secondary sludge in south Isfahan WWTP (as a sample only and with adsorbent addition). The effects of relevant parameters tested were included the contact times between 1 and 10 minutes for microwave oven and 240 and 300 minutes for the electrical furnace, heating and the adsorbent dosage in the range of 5 to 30(w/w%) affect of the sludge mass temperature production, weight reduction percentage and total and volatile reduction percentage, coliform and HPC decrease. Findings: The study relieved that by increasing the radiation time, the microwave oven performance on the sludge sample increased significantly. In the samples with different percentages of adsorbent addition, the mass temperature increased to 600°c in microwave oven, however, in the samples treated in electrical furnace or with no adsorbent addition(in the microwave oven) no significant effect was observed on the temperature. Overall the study findings on the microbiological characteristics also indicated that the sludge samples contain different percentages of adsorbent addition. The removal efficiency of coliforms and HPC increased up to 100% the microwave oven but in the samples with no adsorbent addition it was able to reduce them to 4.5 and 5 log respectively. Conclusion: Overall data achieved from the study revealed that, if the sludge samples without adsorbent additives are placed under microwave radiation exposures in different times scales, they only are dried lose their humidity, but with different adsorbent addition dosage, in addition to drying, due to excessive temperature increasing in the sample mass, Pyrolysis process may occur and then the sludge samples are stabilized during digestion. Key Words: Microwave, Sewage Sludge, Thermal Treatment
Type of Study: Research |
Subject:
education health and promotion
Received: 2020/07/16 | Accepted: 2011/03/15 | Published: 2011/03/15
Received: 2020/07/16 | Accepted: 2011/03/15 | Published: 2011/03/15
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
